Product Details:
Model Name/Number | F24-6D |
Remote Type | Radio Remote |
Usage/Application | Material Handling |
Material | Nylon fiber |
Color | Yellow |
Range | 100M Approx |
Temperature | -30 deg C - +80 deg C |
Transmitter Size | 186 x 61 x 51 mm |
Transmitter Control Contacts | 12 |
Transmitter Power Supply | 3 VDC |
Transmitter Weight | 260 gms (Approx) |
Receiver Size | 200 x 162 x 51 mm |
Receiver Weight | 1225gms (Approx) |
Surface Finish | Matte |
Additional Information:
Product Details:
Minimum Order Quantity | 25 Set |
Model Name/Number | F21-E1B |
Remote Type | RF Remote Control, Radio Remote Control |
Usage/Application | F21-E1B can be used for Various Application, In Crane this Model is Used for Single Speed 3 Motion |
Power | MULTITECH SYSTEMS |
Packaging Type | Carton Packing |
Color | YELLOW BB |
Brand/Make | TELECRANE |
Distance Range | 100 Mtr |
Weight | weight Of Receiver is about 550 gms. and Weight Of Transmitter is 350gms. |
Frequency Range | 100M Approx |
Battery Life | 2 to 3 Months depends on the usage |
Battery Type | Alkaline Battery AA X 2 No. |
Frequency | We different frequincies |
Brand | Telecrane |
Country of Origin | Made in India |
Use | Universal |
Receiver power supply | 110 /220 V AC,50hz |
Finishing | Nylon Fiber |
Some special features of our system: 1. Being MULTITECH’s sole dealers we have access to their latest technology.Our systems are based on absolutely latest technology and are PC programmable. The programming is done as per crane electrical drawings at our premises. In case of complicated cranes there could be a substantial reduction in interfacing cost. 2. Frequency cards need not be replaced. Only frequency crystals are required to be replaced which are plug-in and plug-out type. Thus customers can maintain the systems themselves at cheaper cost rather than sending the full frequency cards for repairs. This also results in minimum inventory of spares.
3. Very light in weight and easy to install. In fact the installation can be carried out by you without any difficulty. The receiver will be supplied with 2.5 meter cable and can be fixed near the panel on single (F21-2SB, F21-4SB & F21-E1B) or three bolt (F24-BB & F24-10D) provided with anti-vibration dampers.
4. In MULTITECH systems, if magnetic key switch is removed during the operation, the main line will drop. In other words this is an additional safety feature and can be very useful to avoid mishaps in case Emergency Stop button fails to respond.
5. While in operation latest MULTITECH transmitter shows status of batteries in 3 stages. Green confirms healthiness of batteries and while in operation if LED changes to Orange, it means weak battery status. The batteries should be replaced. Red would mean dead batteries. Weak batteries damage the cards.
6. Battery consumption MULTITECH system is lower as a result only 2 batteries are required.
|
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Switch Type | Push Button |
Model Name/Number | F24-BB |
Remote Type | RF Remote Control |
Usage/Application | It is used in Overhead Crane and Various types of Machines and |
Material | PVC |
Spare Part | Transmitter, Receiver and Alkaline Batteries |
Distance Range | 100 Mtr |
Color | YELLOW |
Brand | MULTITECH SYSTEMS |
Country of Origin | Made in India |
Temperature | -30 deg C - +80 deg C |
Receiver Weight | 1225 gms (Approx) |
Receiver Housing | Nylon Fiber |
Transmitter Housing | Nylon Fiber |
Transmitter Weight | 260gms (Approx) |
Transmitter Power Supply | 3 VDC |
Transmitter Size | 186 x 61 x 51 mm |
Range | 100M Approx |
Encoding | Microprocessor based |
Receiver Size | 200x162x51 mm |
Some special features of our system: 1. Being MULTITECH’s sole dealers we have access to their latest technology.Our systems are based on absolutely latest technology and are PC programmable. The programming is done as per crane electrical drawings at our premises. In case of complicated cranes there could be a substantial reduction in interfacing cost. 2. Frequency cards need not be replaced. Only frequency crystals are required to be replaced which are plug-in and plug-out type. Thus customers can maintain the systems themselves at cheaper cost rather than sending the full frequency cards for repairs. This also results in minimum inventory of spares.
3. Very light in weight and easy to install. In fact the installation can be carried out by you without any difficulty. The receiver will be supplied with 2.5 meter cable and can be fixed near the panel on single (F21-2SB, F21-4SB & F21-E1B) or three bolt (F24-BB & F24-10D) provided with anti-vibration dampers.
4. In MULTITECH systems, if magnetic key switch is removed during the operation, the main line will drop. In other words this is an additional safety feature and can be very useful to avoid mishaps in case Emergency Stop button fails to respond.
5. While in operation latest MULTITECH transmitter shows status of batteries in 3 stages. Green confirms healthiness of batteries and while in operation if LED changes to Orange, it means weak battery status. The batteries should be replaced. Red would mean dead batteries. Weak batteries damage the cards.
6. Battery consumption MULTITECH system is lower as a result only 2 batteries are required.
|
Additional Information:
Product Details:
Minimum Order Quantity | 1 Set |
Switch Type | Joy Stick, Push Buttons, Toggle Switch |
Model Name/Number | F24-60 and F24-60+ |
Remote Type | Joystick Remote |
Usage/Application | Material Handling |
Spare Part | Joy Stick |
Distance Range | 100 Mtr. |
Color | orange |
Brand/Make | MULTITECH SYSTEMS |
Receiver Power | 110/25V |
Transmitter Power Supply | 3V |
Country of Origin | Made in India |
Temperature | -30 deg C - +80 deg C |
Decoding | Microprocessor based |
Transmitter Size | 186 x 61 x 51 mm |
Weight | 1225 gms (Approx) |
Receiver Size | 290 x 230 x 70 mm |
Receiver Weight | 2200 gms (Approx) |
Some special features of our system:
1. Being MULTITECH’s sole dealers we have access to their latest technology.Our systems are based on absolutely latest technology and are PC programmable. The programming is done as per crane electrical drawings at our premises. In case of complicated cranes there could be a substantial reduction in interfacing cost.
2. Frequency cards need not be replaced. Only frequency crystals are required to be replaced which are plug-in and plug-out type. Thus customers can maintain the systems themselves at cheaper cost rather than sending the full frequency cards for repairs. This also results in minimum inventory of spares.
3. Very light in weight and easy to install. In fact the installation can be carried out by you without any difficulty. The receiver will be supplied with 2.5 meter cable and can be fixed near the panel on single (F21-2SB, F21-4SB & F21-E1B) or three bolt (F24-BB & F24-10D) provided with anti-vibration dampers.
4. In MULTITECH systems, if magnetic key switch is removed during the operation, the main line will drop. In other words this is an additional safety feature and can be very useful to avoid mishaps in case Emergency Stop button fails to respond.
5. While in operation latest MULTITECH transmitter shows status of batteries in 3 stages. Green confirms healthiness of batteries and while in operation if LED changes to Orange, it means weak battery status. The batteries should be replaced. Red would mean dead batteries. Weak batteries damage the cards.
6. Battery consumption MULTITECH system is lower as a result only 2 batteries are required.
Additional Information:
Product Details:
Model Name/Number | F24-10D |
Usage/Application | Material Handling |
Material | PP |
Color | YELLOW |
Brand/Make | MULTITECH SYSTEMS |
Country of Origin | Made in India |
Range | 100M Approx. |
Transmitter Dimension | 186 x 61 x 51 mm |
Min Temperature | -30 deg C |
Max Temperature | +75 deg C |
Transmitter Power Supply | 3 VDC |
Transmitter Weight | 260 gms (Approx) |
Receiver Size | 200 x 162 x 51 mm |
Receiver Weight | 1225 gms (Approx) |
Additional Information:
Product Details:
Model Name/Number | F21-4SB |
Usage/Application | Material Handling |
Material | MULTITECH SYSTEMS |
Brand | Multitech Systems |
Encoding | Microprocessor based |
Transmitter Control Contacts | 9 |
Transmitter Housing | Nylon Fiber |
Transmitter Weight | 350 gms (Approx) |
Transmitter Power Supply | 3 VDC |
Receiver Power Supply | 110/220 VAC 50Hz |
Receiver Size | 185x85x85 mm |
Receiver Weight | 550 gms (Approx) |
Range | 100M Approx. |
Temperature | -30 deg C - +80 deg C |
Transmitter Size | 164 x 75 x 46 mm |
Additional Information:
Product Details:
Model Name/Number | F21-2SB |
Remote Type | Radio Remote Systems |
Usage/Application | Material Handling |
Material | MULTITECH SYSTEMS |
Application | Eot Crane Spares, Material Handling |
Distance Range | 100 Mtr |
Brand/Make | MULTITECH SYSTEMS |
Temperature | -35deg C - +80-deg C- |
Encoding | Microprocessor based |
Receiver Size | 185 x 85 x 85 mm |
Receiver Weight | 550 gms (Approx) |
Transmitter Size | 164 x 75 x 46 mm |
Transmitter Weight | 350 gms (Approx) |
Transmitter Power Supply | 3 VDC |
Additional Information:
Product Details:
Model Name/Number | F21-2S |
Remote Type | IR Remote Control |
Usage/Application | Material Handling |
Distance Range | 100M Approx. |
Color | orange |
Brand/Make | MULTITECH SYSTEMS |
Crane Type | telecrane |
Receiver Power | 110/220/VAC 50Hz |
Transmitter Power Supply | 3V |
Brand | MULTITECH SYSTEMS |
Country of Origin | Made in India |
weight | 120g |