Limit Switch

Product Details:

Weight operated limit switches are used on control/power circuit of reversing drives so as to limit their rotation/movement with in a predetermined position. complying to IEC/EN 60947-5-1, IEC/EN 60529, IEC 60068-2-78, IEC 60068-2-30. 

Operation-
When the snatch block of the crane reaches its top position the snatch boxes pushes a plate which is hanging from one end of the lever of the limit switches. due to the weight placed on the other end of the lever, this lever is pushed up. when the lever is pushed up the shaft to which this lever is connected rotates there by rotating the cams which eventually open the contacts.

Product Details:

Rotary geared limit switch grls is used to trip motor supply when the moving loads reach the extreme end positions of working zone. the driving motion is transmitted by worm gear through worm shaft. the rotations and movements are transmitted to switches by adjustable cams. complying to IEC/EN 60947-5-1, IEC/EN 60529, IES 60060-2-78 IEC 60068-2-30.

Applications-
A rotary geared limit switch are suitable for use on reversing drivs such as hoists, winches rolling mills and various other mechanisms used in steel plants such as coke even, feeding oven machinery etc.

Product Details:

Lever type limit switch operates the control change-over contacts of motor of an moving equipments when a cam moving with loads actuates the lever of limit switch. this turns the cam on a square shaft and operate the NO/NC change over contact elements.

Technical Data-
Body material= Aluminium die cast(powder)
Protection degree=IP-55 confirming to (IS/IEC-60529(2001)
Mounting position=floor
Cable entries=2,3/4' circuit
No. of contacts=MAX 2
Contact material=silver cadmium
Wire connection=screw terminal
Rated voltage=500 V.A.C max
Thermal test current= 10A

Additional Information:

• Production Capacity: 2000
• Delivery Time: Within 1 Week
• Packaging Details: As per Customers requirement

Product Details:

Lever type limit switch operates the control change-over contacts of motor of an moving equipments when a cam moving with loads actuates the lever of limit switch. this turns the cam on a square shaft and operate the NO/NC change over contact elements.

Technical Data-
Body material= Aluminium die cast(powder)
Protection degree=IP-55 confirming to (IS/IEC-60529(2001)
Mounting position=floor
Cable entries=2,3/4' circuit
No. of contacts=MAX 4
Contact material=silver cadmium
Wire connection=screw terminal
Rated voltage=500 V.A.C max
Thermal test current= 40A

Product Details:

Rotary geared limit switch grls is used to trip motor supply when the moving loads reach the extreme end positions of working zone. the driving motion is transmitted by worm gear through worm shaft. the rotations and movements are transmitted to switches by adjustable cams. complying to IEC/EN 60947-5-1, IEC/EN 60529, IES 60060-2-78 IEC 60068-2-30.

Applications-
A rotary geared limit switch are suitable for use on reversing drivs such as hoists, winches rolling mills and various other mechanisms used in steel plants such as coke even, feeding oven machinery etc.

Product Details:

Rotary geared limit switch grls is used to trip motor supply when the moving loads reach the extreme end positions of working zone. the driving motion is transmitted by worm gear through worm shaft. the rotations and movements are transmitted to switches by adjustable cams. complying to IEC/EN 60947-5-1, IEC/EN 60529, IES 60060-2-78 IEC 60068-2-30.

Applications-
A rotary geared limit switch are suitable for use on reversing drivs such as hoists, winches rolling mills and various other mechanisms used in steel plants such as coke even, feeding oven machinery etc.

Product Details:

Rotary geared limit switch grls is used to trip motor supply when the moving loads reach the extreme end positions of working zone. the driving motion is transmitted by worm gear through worm shaft. the rotations and movements are transmitted to switches by adjustable cams. complying to IEC/EN 60947-5-1, IEC/EN 60529, IES 60060-2-78 IEC 60068-2-30.

Applications-
A rotary geared limit switch are suitable for use on reversing drivs such as hoists, winches rolling mills and various other mechanisms used in steel plants such as coke even, feeding oven machinery etc.

Product Details:

We are one of the leading manufacturer, supplier & exporter of Rotary FG Type  Limit Switch. We provide high-quality products to our clients. 

Features:

• High strength
• High temperature
• Wear-resistant
• Without pollution
• Noiselessly
• Good stability
• Long life

Additional Information:

• Item Code: FG
• Production Capacity: 1000
• Delivery Time: Within a day time

Product Details:

We are offering Rotary Limit Switches FG 50 to our clients. We provide high-quality products to our clients. 

Features:

• High strength
• Long life